Select Page

In this step-by-step video, we’ll guide you through the process of replacing the line in your LawnMaster Curved Shaft Line Trimmer. Whether you’re new to line trimmer maintenance or just looking for a quick refresher, our easy-to-follow instructions and helpful tips will have you replacing your line like a pro in no time!

Step by step guide:

  1. Unclip two fastening clips to release the spool head
  2. Remove the spool, clear all left over line
  3. Cut 3m length of Prime Parts 2.mm line – This can be purchased at your local dealer
  4. Check spool head for which way to wind on the line
  5. Fold line in half to create a fold
  6. Put fold over middle rim and wind on with the line on either side
  7. Keep in firm while winding round and round until you have approx. 200mm left
  8. Put line ends into the slots of the spool
  9. Insert spool into cover with the holes lining up – then pull line into the holes
  10. Clip cover back on to the trimmer head

Fun Fact:

its best to cut the line slightly shorter than the blade on the guard. This will help with initially starting the machine.